bonusuf.blogg.se - Studio one 4 files on separate drive

You should never partition SSD! Allocate entire 250 GB to 'C' drive and have all the windows related systems and other programs in 'C' drive.

This way you will always remember that sda is meant for windows-10 and you will always remember it. Select /dev/sda for windows-10 installation. While installing windows-10, you will see two devices appear in front of you and you will be asked to select any one to continue with installation. Whenever your PC is opened up later for any reasons, from the color of SSDs itself, you can tell that, for example, Windows-10 was installed in 250 SSD Kingston (red in color) and Ubuntu was installed on Samsung 250 SSD (some other color) respectively. This will be helpful to find out what is where. When you open up BIOS setup screen you can immediately observe the bootloaders bearing the SSD brand. If I were you, I would go for a Kingston 250 GB SSD and a Samsung 250 GB SSD. The first mistake was to purchase identical 250 GB SSD of same make. Part-I: Install Windows 10 on first SSD (/dev/sda) Will work sometimes and suddenly there will be malfunction. Will create a situation which is hard to diagnosis because computer

If you have not properly plugged SSD back into socket tightly, this.

It tooks me days to identify the problem and I did once a blunder and my front-panel audio and USB ports Work on one component and if you are little careless, you may disturb Which may disturb the other parts of Motherboard and there will beĪlways the possibilties of creating loose connection.

While unplugging SSD with tight socket fittings, you may apply force.

Plugging & unplugging SSDs may cause neighboring componentsĬonnection issues and your computer may not start or malfunction and.

You should never unplug anything and never mess around your computer Hardware. The removal of this extraneous entry is the role of Part-IV of this answer-session. It is wiser to attempt to remove such an extraneous GRUB entry instead of practicing this 'harmful' method of dual-boot installation.

This act of plugging and unplugging of SSDs have been practiced by a few just to avoid "an extraneous GRUB entry is being installed on the EFI Boot Partition of the Windows 10 SSD". The act of plugging and unplugging of SSDs from their sockets for dual-boot installation were discouraged and completely condemned because that act was going to harm your computer hardware. In this installation answer session for dual-booted desktop with two separate SSDs, the required procedure will be fully explained in detail.